Late Victorian and interwar residential at the highest point of the South Downs fringe, 60–80m elevation. Highest wind exposure in Worthing coverage area; significant frost and freeze-th. Free quotes, no call-out fee across BN13.
Nowhere we cover sits higher than High Salvington — late-Victorian and interwar property at the highest point of the Downs fringe, between 60 and 80 metres. Most properties carry clay plain tile and natural slate on hipped detached roofs with complex lead geometry. the roads around the windmill, the higher detached stock and the lanes toward Salvington all show it.
This is the highest ground in our coverage area, exposed to both north-westerly and south-westerly gales with significant frost and freeze-thaw — wind and cold, not salt, define the work here. On this stock, the stack faults most common here are cracked flaunching and loose pots, ridge and hip mortar failure from sustained wind exposure and failed lead flashing at the stack. Every chimney job in High Salvington gets exposure-first spec — complex lead detailing and ridge fixing built for the highest wind loads we see.
We access the chimney directly from roof level. We check all four faces of mortar, lead flashing integrity, flaunching and pot stability.
Pre-1930 properties require hydraulic lime. Post-1930 standard hydraulic cement is appropriate. We carry both and apply the correct one without needing instruction.
Salt air attacks chimney mortar through subflorescence — crystal growth within the mortar matrix. West Sussex chimneys warrant 3-year rather than 5-year inspection cycles.
Typical timescales for High Salvington properties. Every roof differs — your written quote confirms the schedule for your job.
| Timescale | Stage | What happens |
|---|---|---|
| 1 day | Re-point & re-flaunch | Pointing and flaunching renewal on an accessible stack with tower or scaffold. |
| 1–2 days | Flashing renewal | Stripping and renewing the full lead flashing set around the stack. |
| 2–3 days | Rebuild above roofline | Taking down and rebuilding a spalled stack from the roofline up. |
| Same day | Removal & make-good | Removing a redundant stack and weathering the roof over, on a straightforward roof. |
Pointing, flaunching and leadwork backed in writing against defects.
We use Code 5 lead to flashings and gutters — the right weight for coastal exposure.
Loose pots and unstable stacks made safe — important on exposed High Salvington roofs.
"High Salvington Lane property, ridge and hip mortar in flexible mix. No failures through the last two winters."
"Lead valley replacement on our hipped detached. Complex job done correctly first time."
"Clay tile re-roof on our period property. Specified for the exposure conditions."
In BN13, chimney repoint (standard) typically costs £200–£500. Call 01903 905 128 for a free written quote.
Yes — all of High Salvington and the BN13 postcode. Call 01903 905 128 to arrange a free inspection and quote.
Late Victorian and interwar residential at the highest point of the South Downs fringe, 60–80m elevation. Clay plain tile and natural slate on period properties; hipped detached roofs with complex lead geometry.
Highest wind exposure in Worthing coverage area; significant frost and freeze-thaw; north-westerly and south-westerly gale exposure. We apply appropriate specification on all High Salvington work as standard.
Ridge and hip mortar failure; lead valley failure on hipped detached properties; most severe exposure conditions in the portfolio.
For emergencies in BN13 we aim for same-day attendance. Non-urgent work within 3–5 working days. Call 01903 905 128.
All workmanship carries a 10-year written guarantee plus any applicable manufacturer guarantee. Call 01903 905 128.
No call-out fees. No obligation. A free quote from a local Worthing roofer.
01903 905 128© Worthing Roofing Experts · Worthing, West Sussex BN11 · 01903 905 128
NFRC Registered · Fully Insured · 10-Year Guarantee